Cabinet housings (SHCHO-70 P/ P ECO)

Switchboard enclosures of the SCHO70 series are designed for completing switchgear with a voltage of 380/220V three-phase alternating current with a frequency of 50 Hz, serving for electric power receipt, distribution, protection of outgoing lines from overloads and short-circuit currents.

Catalog of standard products PDF
Catalog of typical schemes

Цена от: 5 997 р.

Rated current, A	2500
Metal thickness, mm	2
Type of coating	Powder epoxy-polyester
Protection degree	Front side — IP20, other — IP00
Door opening angle	At least 95°

Dimensions od SHCHO-70 (P) ECO (s=1.4 mm)

No.	Type	HxWxD, mm
1	2-door with external grounding	2200х1000х600
2	With external grounding	2200х600х600
3	With external grounding	2200х800х600
4	With external grounding	2200х1000х600
5	With external grounding	2200х300х600

Dimensions od SHCHO-70 (P)

No.	Type	HxWxD, mm
1	With external grounding	2200х600х600
2	2-door with external grounding	2200х600х600
3	With external grounding	2200х800х600
4	With external grounding	2200х1000х600
5	2-door with external grounding	2200х1000х600

Name	Dimensions
Name	H — 2200 W — 600 D — 600	H — 2200 W — 800 D— 600	H — 2200 W — 1000 D — 600
Frame	1	1	1
Door	1	1	1
Upper panel	1	1	1
Pocket for documents	1	1	1
Lock	2	2	2
Grounding conductor	1	1	1
"Grounding" sticker	2	2	2
"Attention! Electrical voltage" sticker	1	1	1
Passport	1	1	1

- Excellent strength and rigidity for all types of loads.
- Possibility of combining the buildings into blocks.
- Removable door with a pocket for documents.
- Aesthetic appearance.
- Reliable corrosion protection.

Application

SCHO-70 enclosures are used to complete switchgear: SWG, MDB and other equipment. They can be used in textile and pharmaceutical factories, metallurgical, electrical and other plants, railway enterprises, airports, sports complexes and stadiums. Boards with such enclosures are mounted on agricultural facilities, they are used to distribute electricity between a transformer substation and end users, perform the receipt and further transmission of electric current in three-phase networks.

Assembly options

The enclosure for front access switchboards is made of sheets of ferrous metal or stainless steel. They are welded into a single structure, which is equipped with mounting panels to accommodate internal components. The product is coated with epoxy polyester powder. This makes it possible to increase its ability to resist the effects of the aggressive external environment. At the customer's request, it is possible to equip the shield with two doors. As for the protection level, in the standard version it is IP20, if necessary, it can be increased.

Send a request

Cabinet housings (SHCHO-70 P/ P ECO)

Cabinet housings (SHCHO-70 P/ P ECO)